Apollo Accelerators

Apollo Accelerators Discussion Forum

Search found 10 matches

[ Search found 10 matches ]
Author Message
mark
Post subject: Re: VAMPIRE 500V2+ - No Display Posted: Mon 12 Feb 2018 10:14

 
Replies: 7
Views: 1115
 


viewtopic.php?t=1765#p2296
This may help you can remove your rom chip and for me this capacitor was in the way of the vampier going in to the 6800 socket
hope this helps
mark
mark
Post subject: Re: 1M chipmem apollo core update? Posted: Mon 12 Feb 2018 10:02

 
Replies: 3
Views: 480
 


viewtopic.php?f=12&t=1781
this may be interesting read for you :)
mark
Post subject: Re: Micro sd slot on the Vampire 500 v2 Posted: Mon 12 Feb 2018 09:56

 
Replies: 3
Views: 640
 


Hi i can only advise you as a user
if you have a look at this video it may help you to set up your sd card on a vampier v500
https://youtu.be/FAvyugF2dxs
hope this helps
mark
mark
Post subject: Re: trapdoor 512k expansion ram needed? Posted: Mon 12 Feb 2018 09:50

 
Replies: 4
Views: 718
 


Hi i can only advise you as a user on my A 500 plus the trapdoor memory works fine with the vampier , until gold 2.7 or is it 3.0 comes out any extra chip ram you can get will help programs like whd load to work but that depens on which A 500 you have ,as to if the trapdoor memory is chip ram or not...
mark
Post subject: Re: Amiga Chip RAM WHDload Posted: Wed 19 Jul 2017 18:20

 
Replies: 5
Views: 2097
 


Thanks for info on chip ram looking forward to gold 3 :D
mark
Post subject: Amiga Chip RAM WHDload Posted: Tue 11 Jul 2017 16:03

 
Replies: 5
Views: 2097
 


Hi all Its been a long time Since I've used my A 500 and had forgot about chip ram limits. Using WHD load on a amiga A600 and A1200 you do not run in to chip ram problems Often , but on the A 500 you do . Now the problem I had, was that some games I run under WHD load a would not run, They are expec...
mark
Post subject: Re: Help with vampire500v2 Posted: Sat 8 Jul 2017 14:34

 
Replies: 5
Views: 1360
 


Hi have to admit not to now how the amiga A 2000 boot Priority works.. so the only thing I can suggest is to remove all boot drives "Disconnect them " Attach CF card and interface to IDE connector on the vampire card , assuming you have one set up , and see if it boots . sorry I can not help further...
mark
Post subject: A500 plus fitting the Vampire. Posted: Sun 2 Jul 2017 19:43

 
Replies: 2
Views: 946
 


Hi hope this helps A500 plus Owners The 500 plus has a Capacitor in between fat Agnus socket and rom chip Positioned at "c816" which stops the vampire board locating fully down in the cpu slot. My solution to the problem was to replace the capacitor with a smaller one that will do the same job. Afte...
mark
Post subject: Re: Help with vampire500v2 Posted: Sun 2 Jul 2017 19:07

 
Replies: 5
Views: 1360
 


Hi hope I can help you and others. The 500 plus has a Capacitor in between fat Agnus socket and rom chip Positioned at "c816" which stops the vampire board locating fully down in the cpu slot. My solution to the problem was to replace the capacitor with a smaller one that will do the same job. After...
mark
Post subject: pictures and art vampire 500 v2 Posted: Sat 1 Jul 2017 15:59

 
Replies: 2
Views: 959
 


https://s5.postimg.org/4ef2izufn/amig_v.png https://s5.postimg.org/h736ix61f/amiga_2.png https://s5.postimg.org/68rx0qhg3/amiga_new.png https://s5.postimg.org/80ph9dq6r/amiga_xv.png https://s5.postimg.org/w5lldcl3n/vamp1.png https://s5.postimg.org/6vvf403pv/vamp22.png https://s5.postimg.org/sjkdeg4...
Display: Sort by: Direction:
Go to advanced search [ Search found 10 matches ]
Jump to: