Apollo Accelerators

Apollo Accelerators Discussion Forum

My 3D printed HDMI port modification.

Post Reply   Page 1 of 1  [ 3 posts ]
Author Message
TrashyMG
Post subject: My 3D printed HDMI port modification.
Posted: Thu 2 Mar 2017 19:23
Offline
 
Posts: 18
Joined: Fri 20 Jan 2017 00:52
 
As some on IRC already seen this, but I threw this together on thingiverse. This is a quick and dirty design I did, it requires desoldering the RF connector. It uses an Female to Female HDMI adapter easily found on Amazon. also I shared the short HDMI cable I use. It's nothing special, but may save someone 15 minutes designing something themselves.

http://www.thingiverse.com/thing:2147872


Top
Profile Quote
TuKo
Post subject: Re: My 3D printed HDMI port modification.
Posted: Fri 30 Jun 2017 19:45
Administrateur du site
User avatar
Offline
 
Posts: 114
Joined: Thu 17 Nov 2016 23:29
Location: Switzerland
Contact: YouTube
 
this is really nice !

Thanks for sharing !

_________________

A600, V600 V2, A604n+Indi+RTC, CF 32Gb, WiFi
A500+, V500 V2+, Kipper 1MB ChipRAM, CF 32GB, Indivision ECS, ESP8266, Plipbox
A4000D, CS MK2 68060@66MHz 128Mb, Indi MK2cr, CF 16Gb, CV64 4Mb, FastATA MK-VI, Ariadne II


Top
Profile Quote
Niding
Post subject: Re: My 3D printed HDMI port modification.
Posted: Fri 30 Jun 2017 21:06
Offline
 
Posts: 18
Joined: Sun 20 Nov 2016 14:19
 
Very nice indeed :)

Might be a small thing, but one of those items that completes a build.


Top
Profile Quote
Display: Sort by: Direction:
Post Reply   Page 1 of 1  [ 3 posts ]
Return to “Vampire 600 V2”
Jump to: