Apollo Accelerators

Apollo Accelerators Discussion Forum
» » » »
[Locked] [*]  Page 1 of 1  [ 6 posts ]
Author Message
Uigiflip
Post subject: my vampire 600 v2 died after gold version 1 upgrade Posted: Sat 1 Apr 2017 02:25
Offline
Posts: 30
Joined: Sat 19 Nov 2016 18:07
I have ordered a usb blaster and downloaded quartus. What do I need to do diagnose my vampire? i have tried unplugging replugging into the 68000 cpu, with power off and get red and yellow screen on my amiga. I have also tried removing Rom os chip still same.

My amiga 600 is a version 1.5 motherboard and tried on another version 1.5 board I have and the same red n yellow screen result.


Top
[Profile]
Uigiflip
Post subject: Re: my vampire 600 v2 died after gold version 1 upgrade Posted: Sat 1 Apr 2017 16:32
Offline
Posts: 30
Joined: Sat 19 Nov 2016 18:07
Renaud Schweingruber "advised to clean 68000 cpu and cpu vampire socket with isopropyl alcohol". After cleaning and reinserting card, Still same yellow error screen.


Top
[Profile]
guibrush
Post subject: Re: my vampire 600 v2 died after gold version 1 upgrade Posted: Sat 1 Apr 2017 20:24
Offline
User avatar
Posts: 96
Joined: Sat 19 Nov 2016 14:12
I'm then afraid that you have to flash your vampire using the usb blaster. drop a mail there http://www.apollo-accelerators.com/#contact when you have your blaster and are ready to flash according the instructions found there :
http://wiki.apollo-accelerators.com/dok ... re_quartus
we will then send you a file to do that.

_________________

A600 V1.5, V600 V2, A604n, RTC, Indi ECS, 32Gb CF, PCMCIA Ethernet, HD floppy, TOM, HP Pavilion 23xi monitor
A500+V8A, V500+, Indi ECS, 32Gb CF, SD-net, SD floppy, Kipper 2Mb chip expansion, TOM, Eizo EV2450


Top
[Profile]
Uigiflip
Post subject: Re: my vampire 600 v2 died after gold version 1 upgrade Posted: Fri 7 Apr 2017 20:05
Offline
Posts: 30
Joined: Sat 19 Nov 2016 18:07
tried twice flashing with provided v3_3686_magic_803.jic file within quartus programmer.

got this output

Info (209060): Started Programmer operation at Fri Apr 07 18:33:41 2017
Info (209016): Configuring device index 1
Info (209017): Device 1 contains JTAG ID code 0x020F40DD
Info (209007): Configuration succeeded -- 1 device(s) configured
Info (209018): Device 1 silicon ID is 0x14
Info (209044): Erasing ASP configuration device(s)
Info (209023): Programming device(s)
Info (209021): Performing CRC verification on device(s)
Info (209011): Successfully performed operation(s)
Info (209061): Ended Programmer operation at Fri Apr 07 18:34:44 2017

I now get power on green led then pulsating red led on vampire and yellow screen on rgb port.


Top
[Profile]
Uigiflip
Post subject: Re: my vampire 600 v2 died after gold version 1 upgrade Posted: Wed 12 Apr 2017 18:17
Offline
Posts: 30
Joined: Sat 19 Nov 2016 18:07
done some diagnostics with Renaud and RMAed to Majsta. Majsta will attempt repair, if not repairable will get a new one.


Top
[Profile]
Uigiflip
Post subject: Re: my vampire 600 v2 died after gold version 1 upgrade Posted: Tue 9 May 2017 23:34
Offline
Posts: 30
Joined: Sat 19 Nov 2016 18:07
been resolved, received repaired board with gold v2 installed


Top
[Profile]
Display: Sort by: Direction:
[Locked]  Page 1 of 1  [ 6 posts ] Return to “Closed topics”

Jump to: 

Who is online

Users browsing this forum: No registered users and 0 guests


» The team | Delete all board cookies | All times are UTC+01:00

cron