Apollo Accelerators

Apollo Accelerators Discussion Forum
» » »
[Post Reply] [*]  Page 1 of 1  [ 7 posts ]
Author Message
cthulhu
Post subject: Retention screws Posted: Tue 4 Jul 2017 13:14
Offline
Posts: 6
Joined: Fri 23 Jun 2017 15:19
My Vampire came from Majsta with the old 3D printed spacers and small screws, but after uninstalling the Vampire (that mobo needed a recap) and putting it on another A600, the screw holes in the spacers became too loose and I can't use them anymore.
Now, I remember I saw a video from Kipper2k showing the screws he selected to keep the V600V2 firmly attached to the motherboard.
Anybody knows which kind of screws he used?

_________________

Iä! Iä! Cthulhu Fhtagn! Ph'nglui Mglw'nafh Cthulhu R'lyeh wgah'nagl fhtagn.


Top
[Profile] [Quote]
Gege
Post subject: Re: Retention screws Posted: Wed 5 Jul 2017 09:05
Offline
Posts: 8
Joined: Thu 20 Apr 2017 13:56
If the holes in the spacers is to big you can't use the same screw and you can't put a bigger one because the holes in PCB are not extensible.
You can drill spacers holes and use nuts and bolts M1.6/16mm like bolts and nuts.
You can also print this spacer.

I use both and the result:
[ img ]


Last edited by Gege on Wed 5 Jul 2017 10:59, edited 1 time in total.

Top
[Profile] [Quote]
cthulhu
Post subject: Re: Retention screws Posted: Wed 5 Jul 2017 10:42
Offline
Posts: 6
Joined: Fri 23 Jun 2017 15:19
Thank you @gege, that's exactly what I was looking for!

_________________

Iä! Iä! Cthulhu Fhtagn! Ph'nglui Mglw'nafh Cthulhu R'lyeh wgah'nagl fhtagn.


Top
[Profile] [Quote]
SpacemonkeyUK
Post subject: Re: Retention screws Posted: Tue 15 Aug 2017 20:46
Offline
Posts: 32
Joined: Mon 5 Dec 2016 11:21
Gege wrote: *  Wed 5 Jul 2017 09:05
If the holes in the spacers is to big you can't use the same screw and you can't put a bigger one because the holes in PCB are not extensible.
You can drill spacers holes and use nuts and bolts M1.6/16mm like bolts and nuts.
You can also print this spacer.

I use both and the result:
[ img ]
Can i ask where you got them printed and how much did it cost


Top
[Profile] [Quote]
Gege
Post subject: Re: Retention screws Posted: Tue 15 Aug 2017 21:18
Offline
Posts: 8
Joined: Thu 20 Apr 2017 13:56
I use 3DHub to find a local people to print it. It cost me 5.80 euro (6.80 usd, 5.3 gbp).


Top
[Profile] [Quote]
felixthecat
Post subject: Re: Retention screws Posted: Fri 1 Sep 2017 20:20
Offline
Posts: 5
Joined: Fri 11 Aug 2017 00:45
it gege did u have to drll with this spacer


Top
[Profile] [Quote]
Gege
Post subject: Re: Retention screws Posted: Fri 1 Sep 2017 20:38
Offline
Posts: 8
Joined: Thu 20 Apr 2017 13:56
Yes the holes are not exactly in the right place.


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 1 of 1  [ 7 posts ] Return to “Vampire 600 V2”

Jump to: 

Who is online

Users browsing this forum: No registered users and 2 guests


» The team | Delete all board cookies | All times are UTC+02:00

cron