Apollo Accelerators

Apollo Accelerators Discussion Forum
» » »
[Post Reply] [*]  Page 1 of 1  [ 3 posts ]
Author Message
Post subject: Accessible hdmi + Vga Posted: Sat 31 Dec 2016 15:18
Posts: 3
Joined: Sat 31 Dec 2016 15:06
This is work in progress (need to make a nicer cutout, and room for the vga screws) but physical this works very well, both connector is stable and easy accessible.

Wonders of having a 3d printer.
[ attachment ]
vampire3d.png (146.03 KiB) Viewed 1176 times
[ attachment ]
vampire3d2.png (254.55 KiB) Viewed 1176 times
[ attachment ]
vampire3d3.png (55.68 KiB) Viewed 1176 times

Currently working on a mounting frame for the vampire itself, the screw option it came with does not work good enought, and I want a machine that can be moved without needing do open it up afterwards!

(Also notice my 3dprinted CF card holder that snaps on top of the pcmcia slot and keeps it nice in place).

[Profile] [Quote]
Post subject: Re: Accessible hdmi + Vga Posted: Thu 5 Jan 2017 15:01
User avatar
Posts: 97
Joined: Sat 19 Nov 2016 14:12
Nice mod ! I personaly won't do it, because I expect that we don't need the Indivision sooner or later. In the meantine, letting it hanging out the case is ok for me.


A600 V1.5, V600 V2, A604n, RTC, Indi ECS, 32Gb CF, PCMCIA Ethernet, HD floppy, TOM, HP Pavilion 23xi monitor
A500+V8A, V500+, Indi ECS, 32Gb CF, SD-net, SD floppy, Kipper 2Mb chip expansion, TOM, Eizo EV2450

[Profile] [Quote]
Post subject: Re: Accessible hdmi + Vga Posted: Fri 30 Jun 2017 19:47
Administrateur du site
User avatar
Posts: 103
Joined: Thu 17 Nov 2016 23:29
Location: Switzerland
Contact: YouTube
Picture links are dead :-(


A600, V600 V2, A604n+Indi+RTC, CF 32Gb, WiFi
A500+, V500 V2+, Kipper 1MB ChipRAM, CF 32GB, Indivision ECS, ESP8266, Plipbox
A4000D, CS MK2 68060@66MHz 128Mb, Indi MK2cr, CF 16Gb, CV64 4Mb, FastATA MK-VI, Ariadne II

[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 1 of 1  [ 3 posts ] Return to “Vampire 600 V2”

Jump to: 

Who is online

Users browsing this forum: No registered users and 1 guest

» The team | Delete all board cookies | All times are UTC+01:00