Apollo Accelerators

Apollo Accelerators Discussion Forum

[SOLVED] Internal ide controller

Locked   Page 1 of 1  [ 3 posts ]
Author Message
silversword31
Post subject: [SOLVED] Internal ide controller
Posted: Sat 13 May 2017 08:30
Offline
 
Posts: 2
Joined: Sat 13 May 2017 08:18
 
Hi,
I'd like to know if there is anyway to deactivate the internal ide controller of the V500 V2+?
I've several scsi device and i'd like to use my old ARCHOS ADD2000 scsi card.
Thanks a lot :)


Top
Profile
silversword31
Post subject: Re: Internal ide controller
Posted: Thu 18 May 2017 21:55
Offline
 
Posts: 2
Joined: Sat 13 May 2017 08:18
 
In fact, Vampire works with scsi card as my Achos Add2000. Without any disk, it takes about 1min to boot but it boot. This card had 2Mb memory which is compatible with vampire. I've now 130Mb of FastRam :)
Internal ide is also compatible with ide cdrom and Iomega Zip250.


Top
Profile
TuKo
Post subject: Re: Internal ide controller
Posted: Fri 30 Jun 2017 19:33
Administrateur du site
User avatar
Offline
 
Posts: 114
Joined: Thu 17 Nov 2016 23:29
Location: Switzerland
Contact: YouTube
 
Thanks for the info !

_________________

A600, V600 V2, A604n+Indi+RTC, CF 32Gb, WiFi
A500+, V500 V2+, Kipper 1MB ChipRAM, CF 32GB, Indivision ECS, ESP8266, Plipbox
A4000D, CS MK2 68060@66MHz 128Mb, Indi MK2cr, CF 16Gb, CV64 4Mb, FastATA MK-VI, Ariadne II


Top
Profile
Display: Sort by: Direction:
Locked   Page 1 of 1  [ 3 posts ]
Return to “Closed topics”
Jump to: