Apollo Accelerators

Apollo Accelerators Discussion Forum
» » »
[Post Reply] [*]  Page 1 of 1  [ 3 posts ]
Author Message
Marchie
Post subject: SCSI woes Posted: Wed 22 Nov 2017 01:32
Offline
Posts: 23
Joined: Tue 22 Nov 2016 07:57
Hey Folks,

Anyone know how to get SCSI working with a Vampire?

I have a V500 v2+ in an A2000 and can't get it to work with a SCSI drive attached.

I've tried 2 different cards (a C= 2091 and SCRAM2000), both give the same result: the system can detect the card fine with no drives attached (as scsi2.device) but when I attach a drive (internal or external) it won't boot. If I turn an external drive on after booting, it shows up in HDtoolbox as 'unknown device' and I can't access it or do anything to it.

BTW - I'm using straight-up WB 3.1.

Any help or suggestions very much appreciated!


Top
[Profile] [Quote]
Marko
Post subject: Re: SCSI woes Posted: Wed 22 Nov 2017 20:23
Offline
Posts: 7
Joined: Wed 25 Oct 2017 06:28
See viewtopic.php?f=7&t=1779


Top
[Profile] [Quote]
Marchie
Post subject: Re: SCSI woes Posted: Wed 22 Nov 2017 22:26
Offline
Posts: 23
Joined: Tue 22 Nov 2016 07:57
Thanks Marko,

That thread seems to be exclusively about GVP controllers and I can't find any info I could apply to other SCSI cards ( or SCSI in general). But I'll chime-in and see if any useful advice comes of it...


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 1 of 1  [ 3 posts ] Return to “Vampire 500 V2(+)”

Jump to: 

Who is online

Users browsing this forum: No registered users and 1 guest


» The team | Delete all board cookies | All times are UTC+01:00

cron