Apollo Accelerators

Apollo Accelerators Discussion Forum

Connect ENC28J60 module to V500 V2+ Expansion Header

Post Reply   Page 1 of 1  [ 3 posts ]
Author Message
mark8564
Post subject: Connect ENC28J60 module to V500 V2+ Expansion Header
Posted: Sat 4 Aug 2018 01:05
Offline
 
Posts: 8
Joined: Sun 11 Feb 2018 00:11
 
does anybody know how to setup the ENC28J60 module to V500 V2+ Expansion Header, i have it setup ok i think, the red power led is lit and so is the green led on the Ethernet port the amber led is flashing. But i don't know how to get the settings for the internet to work.


Top
Profile Quote
TuKo
Post subject: Re: Connect ENC28J60 module to V500 V2+ Expansion Header
Posted: Mon 13 Aug 2018 15:36
Administrateur du site
User avatar
Offline
 
Posts: 118
Joined: Thu 17 Nov 2016 23:29
Location: Switzerland
Contact: YouTube
 
Your need latest driver revision :
http://wiki.apollo-accelerators.com/#latest_drivers

and obviously a working TCP/IP stack

Latest coffin has already all built in to get it working quickly and easily

_________________

A600, V600 V2, A604n+Indi+RTC, CF 32Gb, WiFi
A500+, V500 V2+, Kipper 1MB ChipRAM, CF 32GB, Indivision ECS, ESP8266, Plipbox
A4000D, CS MK2 68060@66MHz 128Mb, Indi MK2cr, CF 16Gb, CV64 4Mb, FastATA MK-VI, Ariadne II


Top
Profile Quote
mark8564
Post subject: Re: Connect ENC28J60 module to V500 V2+ Expansion Header
Posted: Sat 18 Aug 2018 00:22
Offline
 
Posts: 8
Joined: Sun 11 Feb 2018 00:11
 
Hi TuKo it's sorted now I thought I had to use the netinterface 'sdnet', But that didn't work so i thought i would try 'V2expeth worked right away no problem. i did follow the wiki it does say to use the sdnet so am abit confused to what driver to use, i just need to buy the licence key for Roadshow. 8-)

Kind Regards
Mark


Top
Profile Quote
Display: Sort by: Direction:
Post Reply   Page 1 of 1  [ 3 posts ]
Return to “Vampire 500 V2(+)”
Jump to:
cron