Apollo Accelerators

My Vampire came from Majsta with the old 3D printed spacers and small screws, but after uninstalling the Vampire (that mobo needed a recap) and putting it on another A600, the screw holes in the spacers became too loose and I can't use them anymore.
Now, I remember I saw a video from Kipper2k showing the screws he selected to keep the V600V2 firmly attached to the motherboard.
Anybody knows which kind of screws he used?

If the holes in the spacers is to big you can't use the same screw and you can't put a bigger one because the holes in PCB are not extensible.
You can drill spacers holes and use nuts and bolts M1.6/16mm like bolts and nuts.
You can also print this spacer.

I use both and the result:

Thank you @gege, that's exactly what I was looking for!

Gege wrote: *

Wed 5 Jul 2017 09:05

If the holes in the spacers is to big you can't use the same screw and you can't put a bigger one because the holes in PCB are not extensible.
You can drill spacers holes and use nuts and bolts M1.6/16mm like bolts and nuts.
You can also print this spacer.

I use both and the result:

Can i ask where you got them printed and how much did it cost

I use 3DHub to find a local people to print it. It cost me 5.80 euro (6.80 usd, 5.3 gbp).

it gege did u have to drll with this spacer

Yes the holes are not exactly in the right place.

Hi, I'm a newbie here, just been sent my allocation email for 600 v2 so super excited. Can I please ask where you got that internal HDMI cable from? looks neat i'd love to do that in my 600, thanks.

I bought mine on aliexpress like this on. Check the length you need (I'm not remember). You can search for "HDMI cable panel mount" on ebay also.

Thank you so much for that link very helpful