Apollo Accelerators

Apollo Accelerators Discussion Forum

Vampire v2 600 - installation problems [UNSOLVED]

Post Reply   Page 2 of 2  [ 15 posts ]
Jump to page « 1 2
Author Message
Amiten
Post subject: Re: Vampire v2 600 - installation problems
Posted: Fri 28 Jul 2017 16:44
User avatar
Offline
 
Posts: 6
Joined: Fri 20 Jan 2017 01:00
 
Hello, Seems to be a Contact Problem (If all is well in the vampire is assumed) I see in your 2nd video you quit the internal microsd good, and can you test with another CF adapter? and can you install the The screws please to see if is happens the same.

try to contact majsta and how he said may he can check the Vampire in teamviewer if you got an a usb blaster.

after than that you are doing the things correct, I hope you can find a solution.

regards


Top
Profile Quote
tassadar
Post subject: Re: Vampire v2 600 - installation problems
Posted: Mon 31 Jul 2017 02:54
Offline
 
Posts: 11
Joined: Tue 13 Jun 2017 03:46
 
I have ordered a USB blaster and attempted to get in touch on IRC. As I'm in Australia I'll try to line up with EU timezones.

*Note also I tried another CF adapter and CF. No difference.


Top
Profile Quote
felixthecat
Post subject: Re: Vampire v2 600 - installation problems
Posted: Fri 11 Aug 2017 01:13
Offline
 
Posts: 5
Joined: Fri 11 Aug 2017 00:45
 
this thread could be mark as solved

https://m.youtube.com/watch?v=zkL4WBsARXM


Top
Profile Quote
tassadar
Post subject: Re: Vampire v2 600 - installation problems
Posted: Fri 11 Aug 2017 23:52
Offline
 
Posts: 11
Joined: Tue 13 Jun 2017 03:46
 
Yes please. Mark as solved. Thanks to all who helped me. It appears it was a contact issue as others had indicated. I cleaned it twice, but it was only my second attempt (light sanding) that the card started working fully. Also to Apollo guys - let me know whether I should remove the videos from youTube or if you'd like them to stay for education purposes :)


Top
Profile Quote
tassadar
Post subject: Re: Vampire v2 600 - installation problems [SOLVED]
Posted: Tue 12 Jun 2018 16:58
Offline
 
Posts: 11
Joined: Tue 13 Jun 2017 03:46
 
Unfortunately, I need to change the status back to 'unsolved' - as after I posted this the board stopped booting. Then I left it for 8 months ...

Fast forward to tonight, I plucked up some enthusiasm to get on IRC and have another go. I was advised by Majsta that I could have a weak FGPA. I don't know if this was a known thing at the time of posting? Anyway, it turns out that it will boot on Gold 2. But when I upgraded to 2.5 (EXE) I think something must have gone wrong?

I am advised to run MBRTest-2 before attempting Gold 2.7 or higher. Will report back here as well as IRC.


Top
Profile Quote
Display: Sort by: Direction:
Post Reply   Page 2 of 2  [ 15 posts ]
Return to “Vampire 600 V2” | Jump to page « 1 2
Jump to:
cron