Apollo Accelerators

Apollo Accelerators Discussion Forum

core 2.8 update brick

Post Reply   Page 1 of 1  [ 4 posts ]
Author Message
gbozkurt
Post subject: core 2.8 update brick
Posted: Thu 29 Mar 2018 10:13
Offline
 
Posts: 2
Joined: Thu 29 Mar 2018 10:05
 
Hi, i have vamp 500 v2 upgraded to 2.7 core
Today i downloaded 2.8 x11 core.
In workbench 3.1 i clicked twice the flashing icon and after aprox 1 min
I have flashing done text on screen.
After waiting 10 sec, i turned off the psu and restarted again.
The DigitalOut screen is black, the rgb screen is gray and the caps lock flicking.
On vampire, power and act. Led are always on.

What is the problem need help...

Thank you.

Gokce


Top
Profile Quote
TuKo
Post subject: Re: core 2.8 update brick
Posted: Thu 29 Mar 2018 16:21
Administrateur du site
User avatar
Offline
 
Posts: 118
Joined: Thu 17 Nov 2016 23:29
Location: Switzerland
Contact: YouTube
 
Hi,

Do you have an USB Blaster ? We will provide you a JIC to flash your Vampire

Join us on IRC once you have one and we will guide you through this

_________________

A600, V600 V2, A604n+Indi+RTC, CF 32Gb, WiFi
A500+, V500 V2+, Kipper 1MB ChipRAM, CF 32GB, Indivision ECS, ESP8266, Plipbox
A4000D, CS MK2 68060@66MHz 128Mb, Indi MK2cr, CF 16Gb, CV64 4Mb, FastATA MK-VI, Ariadne II


Top
Profile Quote
gbozkurt
Post subject: Re: core 2.8 update brick
Posted: Fri 30 Mar 2018 10:30
Offline
 
Posts: 2
Joined: Thu 29 Mar 2018 10:05
 
Hi again,
With usb blaster i tried to update core 10x but it failed. (%11 error on progress bar)
I shuted down the power and, on %13 it failed again.
So i passed to core 11x , and it loaded ...
My vampire is working now.

So i'm curious , I opened x10.exe on workbench, clicked twice, and flashing was done as always.
After waiting 10 sec i opened the psu... Black screen...

I think there is some problems beetwen core 10x and my vampire.


Top
Profile Quote
mac035
Post subject: Re: core 2.8 update brick
Posted: Sat 14 Jul 2018 20:24
Offline
 
Posts: 1
Joined: Sat 14 Jul 2018 20:23
 
gbozkurt wrote: *  Thu 29 Mar 2018 10:13
Hi, i have vamp 500 v2 upgraded to 2.7 core
Today i downloaded 2.8 x11 core.
In workbench 3.1 i clicked twice the flashing icon and after aprox 1 min
I have flashing done text on screen.
After waiting 10 sec, i turned off the psu and restarted again.
The DigitalOut screen is black, the rgb screen is gray and the caps lock flicking.
On vampire, power and act. Led are always on.

What is the problem need help...

Thank you.

Gokce
Hello !
I’m a new member here and I think that this site is a very good one because there are many different subjects and various tips!
Thanks!


Top
Profile Quote
Display: Sort by: Direction:
Post Reply   Page 1 of 1  [ 4 posts ]
Return to “Vampire 500 V2(+)”
Jump to: